Vial Washing Machine Spare Parts: Fingers, Finger Assemblies & Needles
When a vial washer starts chipping necks or missing vials, the cause is usually one worn finger or a blocked needle, not the whole machine. At Vedax Pharmamach in Ahmedabad, we make SS 316L vial washing fingers, finger assemblies and washing needles to match your sample, drawing or machine model, so your line gets back to running without waiting for an OEM part.
Vial Washing Parts We Manufacture in Ahmedabad
We are a vial washing parts manufacturer based in Ahmedabad, Gujarat. We supply pharmaceutical vial washing parts to injectable, ophthalmic and ampoule lines across India. Every part is machined in-house and checked before dispatch.
Vial Washing Finger Assembly and Finger Cassette
A finger assembly is the complete holding unit: the fingers, pivots, springs and body. A finger cassette carries a row of these assemblies on the machine. We make vial holding finger assemblies and vial washing machine finger cassettes to fit your existing layout, with calibrated springs so grip force stays even from the first station to the last.
Vial Washing Needles (Including Ampoule Needles)
The washing needle goes into the vial and delivers water, air or WFI. We make SS 316 vial washing needles and diving spray needles, including needles for ampoule washing. Bore and concentricity are held to ±0.02 mm, and internal surfaces are electropolished so water flows cleanly and nothing collects inside.
Multijet Vial Washing Machine Parts
For multijet washers, we make the fingers, needles and manifolds that work together: multi jet vial washer fingers for India-based plants, matching needle sets and rotary water manifolds. If you send the machine model and station count, we confirm what is needed for the full set.
Parts for Rotary, Linear and External Vial Washing Machines
| Machine type | Parts we make |
|---|---|
| Rotary vial washing machine | Finger assemblies, finger cassettes, diving needles, water manifolds |
| Linear vial washing machine | Holding fingers, needles, guides and change parts |
| External vial washing machine | Gripper fingers, spray nozzles and holding parts |
| High-speed vial washing lines | Wear-prone fingers and needles, supplied as matched sets |
We do not sell a one-size-fits-all part. Each vial washing machine change part is made to your vial size, neck diameter and machine make, so it fits without field modification.
Materials and Finish: What Goes Into a Sterile Vial Washing Part
Sterile vial washing parts touch glass and water that will later go into injectable products. That is why material and finish matter.
| Parameter | What we use |
|---|---|
| Metal | AISI SS 316L (EN 1.4404) with 3.1 material test certificate |
| Soft-contact inlays | Medical-grade PEEK or silicone [confirm grades and certificates] |
| Surface finish | Internal and product-contact surfaces electropolished to Ra ≤ 0.25 µm; external Ra ≤ 0.4 µm |
| Dimensional accuracy | ±0.01 mm on CNC-machined parts for drop-in fit |
| Documentation | FAT dossier and DQ/IQ/OQ support on request |
How We Make a Replacement Part?
- You send a sample, drawing or machine model. A worn finger or needle is enough.
- Our design team reviews it. If no drawing exists, we scan the part in 3D and rebuild it.
- We machine it in-house. CNC and VMC machining in SS 316L, then electropolishing.
- We inspect it. CMM and surface roughness checks, then trial fit before dispatch.
- We pack and dispatch. To plants across India, with export packing when needed.
You can see the machines behind this on our Our Facilities page.
Who Uses Our Vial Washing Spare Parts?
We supply injectable vial washing spare parts to sterile injectable manufacturers, and ophthalmic and ampoule lines that use the same washing stations. If your plant runs a rotary or linear washer and you need spares fast, we are a practical alternative to waiting for imported OEM parts.
Why Plants Choose Vedax Pharmamach?
- One supplier, start to finish. Design, machining, polishing and inspection happen under one roof in Ahmedabad.
- Made from your sample. We can reverse-engineer from a worn part using a 3D scanner.
- Matched sets. Fingers, cassettes and needles come as sets, so wear is even across stations.
- Clear documentation. Material certificates and validation support on request.
Frequently Asked Questions
1. What are vial washing fingers?
- Vial washing fingers are the gripping parts that hold a vial while it is washed. They must hold firmly without scratching the glass, so they are usually SS 316L with a soft PEEK or silicone insert.
2. What is a vial washing finger assembly or finger cassette?
- A finger assembly is the full holding unit with fingers, pivots and springs. A finger cassette is the carrier that holds several assemblies on the machine. We make both to fit your existing layout.
3. What is a vial washing needle, and do you make ampoule needles?
- It is the SS tube that goes into the vial to deliver water or air. Yes, we make ampoule vial washing needles as well as standard vial needles, in SS 316.
4. Do you make multijet vial washing machine parts?
- Yes. We make fingers, needles and manifolds for multijet washers. Send the machine model and number of stations, and we will confirm the full set.
5. Which machines do your parts fit?
- We make parts for rotary, linear and external vial washing machines. Each part is made to your machine make, model and vial size from your sample or drawing.
6. Which material is used for vial washing parts?
- SS 316L for the body and needles, with medical-grade PEEK or silicone where soft contact with glass is needed. SS 3.1 certificates are available.
- Send us your worn finger, needle or drawing. We will tell you what it takes to make it.
Technical Specifications of Our SS 316L Vial Washing Parts
Every vial washing finger, finger assembly and washing needle we make follows the same specification: SS 316L body, electropolished contact surfaces and ±0.01 mm machining. Here is what that means for your line.
Material (Contact Metallurgy)
Fingers, needles and bodies are made from AISI SS 316L (EN 1.4404). Where the part touches glass, we use medical-grade PEEK or silicone inlays.
Surface Finish (Sanitary Polish Level)
Internal bores and product-contact surfaces are electropolished to Ra ≤ 0.25 µm. External surfaces are finished to Ra ≤ 0.4 µm.
Tolerance (Dimensional Accuracy)
Parts are CNC machined to ±0.01 mm, so replacement fingers and needles fit your machine without field rework.
Documentation (Regulatory & Validation Support)
We supply a FAT dossier and support for DQ, IQ and OQ. Material certificates are available for every order.
Need Custom Vial Washing Parts or Pharma Machine Spares?
Send us your container samples, drawings, or machine model. Our engineering team delivers custom prototypes with rapid turnaround times.